Industrial L3 Routing Switch

3onedata ICS5400TSN

44-Port Gigabit/10Gigabit, Layer 3 TSN Industrial Ethernet Switch. 24 Gigabit copper + 16 Gigabit SFP + 4×10G SFP+. IEEE 802.1 TSN protocol suite, PTP, OSPF, BGP, Ring (<20ms). Deterministic transmission for smart manufacturing and industrial automation.

Overview

ICS5400TSN is a 44-port Gigabit/10Gigabit Layer 3 TSN (Time Sensitive Networking) industrial Ethernet switch. With 24 Gigabit copper, 16 Gigabit SFP, and 4×10G SFP+ ports, it delivers high-capacity network infrastructure. Features 19" 1U rack mounting and 160Gbps backplane bandwidth.

TSN Protocol Support

IEEE 802.1AS (Time Synchronization), IEEE 802.1Qbv (Time Aware Shaper), IEEE 802.1Qbu (Frame Preemption), IEEE 802.1CB (Frame Replication and Elimination), IEEE 802.1Qci (Per-Stream Filtering), IEEE 802.1Qcc (Centralized Stream Reservation Protocol, Netconf/Yang). Guarantees deterministic low-latency transmission for critical data flows.

Layer 3 Routing and Management

RIP/RIPng, OSPF/OSPFv3, ISIS, VRRP, BGP, NAT, PIM-SM/DM. STP/RSTP/MSTP, ERPS, MRP, Ring (<20ms recovery). SNMP v1/v2c/v3, CLI, HTTP, HTTPS, Telnet, SSH, Netconf. ACL, 802.1X, RADIUS, TACACS+, DHCP Server/Relay, IGMP/MLD Snooping.

Physical

Backplane: 160Gbps, MAC: 32K, Buffer: 32Mbit. DC: 12-55VDC or AC: 85-264VAC, dual redundancy. Fanless, -40~75°C, IP40, EMC Level 3. 441.6×44.45×290mm. CE, FCC, RoHS, IPv6 Ready.

Switch Features
MAC / Buffer / Backplane32K / 32 Mbit / 160 Gbps
Latency<10μs
Interfaces
Gigabit Copper24× RJ45
Gigabit SFP16× 100/1000Base-X
10G SFP+4× 1G/2.5G/10GBase-X
TSN Protocolsi
ZamanIEEE 802.1AS PTP
PlanlamaIEEE 802.1Qbv (TAS), 802.1Qbu (Preemption)
ReliabilityIEEE 802.1CB (FRER), 802.1Qci (PSFP)
ManagementIEEE 802.1Qcc (Netconf/Yang)
L3 Routing
RoutingRIP, OSPF, ISIS, VRRP, BGP, NAT, PIM-SM/DM
RedundancyRing (<20ms), MRP, STP/RSTP/MSTP, ERPS
Power / Physical
DC / AC12-55VDC / 85-264VAC, dual redundancy
ProtectionIP40, -40~75°C, EMC Level 3
Dimensions441.6×44.45×290mm, 1U rack
CertificationsCE, FCC, RoHS, IPv6 Ready
Warranty5 years
EMC / Electromagnetic Compatibility
ESD (IEC 61000-4-2)Level 3 — Air discharge: ±8kV, Contact discharge: ±6kV
EFT/Burst (IEC 61000-4-4)Level 3 — Power supply: ±2kV, Signal line: ±1kV
Surge (IEC 61000-4-5)Level 3 — Power supply: common mode ±2kV, differential mode ±1kV
Vibration (IEC 60068-2-6)Supported
Authentication and Access Security
802.1XIEEE 802.1X port-based authentication
RADIUSRemote authentication
TACACS+Terminal access controller access control system
User Permission ClassificationMulti-level user authorization

For detailed technical information, please refer to the product datasheet or hardware user manual.

Back